Base Metals Extraction from Printed Circuit Boards by Pressure Acid Leaching

Guadalupe Martinez-Ballesteros*, Jesus Leobardo Valenzuela-Garcia*, Agustin Gomez-Alvarez, Martin Antonio Encinas-Romero, Flerida Adriana Mejia-Zamudio, Aaron de Jesus Rosas-Durazo

*Autor correspondiente de este trabajo

Producción científica: Contribución a una revistaArtículorevisión exhaustiva

2 Citas (Scopus)


Printed circuit boards (PCBs) are a valuable source of raw materials for metal recycling considering that base metal concentration analyses have confirmed that PCB powders are multimetallic in nature and contain high concentrations of Cu, Zn, Ni, and Fe. Given that minerals are not renewable resources, these metals can be recycled through hydrometallurgical processes. In this study, we determined that 2 M sulfuric acid, 0.55 MPa oxygen pressure, and a temperature of 90 °C represent the optimal conditions for leaching of Cu, Zn, and Ni of PCBs, obtaining the highest observed values of recovery of greater than 90% for Zn and 98% for Cu and Ni. The characterization of PCBs by SEM–EDS analyses showed that plates mainly consist of Cu, Ni, and Zn. PCBs can be seen as a potential secondary resource for the recovery of copper, nickel, and zinc. The best potential and pH conditions for the extraction of Cu, Zn, and Ni were also determined on the basis of thermodynamic diagrams.

Idioma originalInglés
Número de artículo98
EstadoPublicada - ene. 2023

Nota bibliográfica

Publisher Copyright:
© 2023 by the authors.


Profundice en los temas de investigación de 'Base Metals Extraction from Printed Circuit Boards by Pressure Acid Leaching'. En conjunto forman una huella única.

Citar esto