Chemical interaction of Sr4Al6O12SO 4 with liquid aluminum alloys

José Amparo Rodríguez-García; Enrique Rocha-Rangel; José Manuel Almanza Robles; Jesús Torres Torres; Ana Lilia Leal Cruz; Guillermo T. Munive

Chemical interaction of Sr₄Al₆O₁₂SO ₄ with liquid aluminum alloys

José Amparo Rodríguez-García^*, Enrique Rocha-Rangel, José Manuel Almanza Robles, Jesús Torres Torres, Ana Lilia Leal Cruz, Guillermo T. Munive

^*Autor correspondiente de este trabajo

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

2 Citas (Scopus)

Resumen

The Sr₄Al₆O₁₂SO₄ compound was synthesized by a solid state reaction from a stoichiometric molar mixture of SrCO₃, Al₂O₃ and SrSO₄. The process of the formation was followed using DTA, TGA, XRD and SEM analyses. In order to study the interaction of this compound with liquid aluminum alloys, the samples were immersed in liquid aluminum. During the synthesis, it was found the formation of two transitory phases, Sr₃Al₂O₆ and SrAl₂O₄, between 900 and 1100°C. The strontium sulphoaluminate start to form around 900°C and it was completely formed at 1150°C. The Sr₄Al₆O₁₂SO₄ showed a slightly interaction with Al-Si alloy, with the formation of layer of alumina (less than 200μm), on the other hand, there was no interaction of this compound with Al-Mg alloy. The sulphoaluminate showed excellent corrosion resistance to aluminum alloys.

Idioma original	Inglés
Título de la publicación alojada	Processing and Properties of Advanced Ceramics and Composites IV
Editorial	American Ceramic Society
Páginas	21-27
Número de páginas	7
ISBN (versión impresa)	9781118273364
Estado	Publicada - 2012
Evento	Int. Symposia on Innovative Processing and Synthesis of Ceramics, Glasses and Composites, Advances in Ceramic Matrix Composites and Microwave Processing of Materials, Held During the Materials Sci. and Technol. 2011 Conf. and Exhibition, MS and T'11 - Columbus, OH, Estados Unidos Duración: 16 oct. 2011 → 20 oct. 2011

Serie de la publicación

Nombre	Ceramic Transactions
Volumen	234
ISSN (versión impresa)	1042-1122

Conferencia

Conferencia	Int. Symposia on Innovative Processing and Synthesis of Ceramics, Glasses and Composites, Advances in Ceramic Matrix Composites and Microwave Processing of Materials, Held During the Materials Sci. and Technol. 2011 Conf. and Exhibition, MS and T'11
País/Territorio	Estados Unidos
Ciudad	Columbus, OH
Período	16/10/11 → 20/10/11

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

@inproceedings{2069ae0e29d443ca874e40e67f72aa1b,

title = "Chemical interaction of Sr4Al6O12SO 4 with liquid aluminum alloys",

abstract = "The Sr4Al6O12SO4 compound was synthesized by a solid state reaction from a stoichiometric molar mixture of SrCO3, Al2O3 and SrSO4. The process of the formation was followed using DTA, TGA, XRD and SEM analyses. In order to study the interaction of this compound with liquid aluminum alloys, the samples were immersed in liquid aluminum. During the synthesis, it was found the formation of two transitory phases, Sr3Al2O6 and SrAl2O4, between 900 and 1100°C. The strontium sulphoaluminate start to form around 900°C and it was completely formed at 1150°C. The Sr4Al6O12SO4 showed a slightly interaction with Al-Si alloy, with the formation of layer of alumina (less than 200μm), on the other hand, there was no interaction of this compound with Al-Mg alloy. The sulphoaluminate showed excellent corrosion resistance to aluminum alloys.",

author = "Rodr{\'i}guez-Garc{\'i}a, {Jos{\'e} Amparo} and Enrique Rocha-Rangel and {Almanza Robles}, {Jos{\'e} Manuel} and {Torres Torres}, Jes{\'u}s and {Leal Cruz}, {Ana Lilia} and Munive, {Guillermo T.}",

year = "2012",

language = "Ingl{\'e}s",

isbn = "9781118273364",

series = "Ceramic Transactions",

publisher = "American Ceramic Society",

pages = "21--27",

booktitle = "Processing and Properties of Advanced Ceramics and Composites IV",

address = "Estados Unidos",

note = "Int. Symposia on Innovative Processing and Synthesis of Ceramics, Glasses and Composites, Advances in Ceramic Matrix Composites and Microwave Processing of Materials, Held During the Materials Sci. and Technol. 2011 Conf. and Exhibition, MS and T'11 ; Conference date: 16-10-2011 Through 20-10-2011",

}

Rodríguez-García, JA, Rocha-Rangel, E, Almanza Robles, JM, Torres Torres, J, Leal Cruz, AL & Munive, GT 2012, Chemical interaction of Sr₄Al₆O₁₂SO ₄ with liquid aluminum alloys. En Processing and Properties of Advanced Ceramics and Composites IV. Ceramic Transactions, vol. 234, American Ceramic Society, pp. 21-27, Int. Symposia on Innovative Processing and Synthesis of Ceramics, Glasses and Composites, Advances in Ceramic Matrix Composites and Microwave Processing of Materials, Held During the Materials Sci. and Technol. 2011 Conf. and Exhibition, MS and T'11, Columbus, OH, Estados Unidos, 16/10/11.

Chemical interaction of Sr₄Al₆O₁₂SO ₄ with liquid aluminum alloys. / Rodríguez-García, José Amparo; Rocha-Rangel, Enrique; Almanza Robles, José Manuel et al.
Processing and Properties of Advanced Ceramics and Composites IV. American Ceramic Society, 2012. p. 21-27 (Ceramic Transactions; Vol. 234).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Chemical interaction of Sr4Al6O12SO 4 with liquid aluminum alloys

AU - Rodríguez-García, José Amparo

AU - Rocha-Rangel, Enrique

AU - Almanza Robles, José Manuel

AU - Torres Torres, Jesús

AU - Leal Cruz, Ana Lilia

AU - Munive, Guillermo T.

PY - 2012

Y1 - 2012

N2 - The Sr4Al6O12SO4 compound was synthesized by a solid state reaction from a stoichiometric molar mixture of SrCO3, Al2O3 and SrSO4. The process of the formation was followed using DTA, TGA, XRD and SEM analyses. In order to study the interaction of this compound with liquid aluminum alloys, the samples were immersed in liquid aluminum. During the synthesis, it was found the formation of two transitory phases, Sr3Al2O6 and SrAl2O4, between 900 and 1100°C. The strontium sulphoaluminate start to form around 900°C and it was completely formed at 1150°C. The Sr4Al6O12SO4 showed a slightly interaction with Al-Si alloy, with the formation of layer of alumina (less than 200μm), on the other hand, there was no interaction of this compound with Al-Mg alloy. The sulphoaluminate showed excellent corrosion resistance to aluminum alloys.

AB - The Sr4Al6O12SO4 compound was synthesized by a solid state reaction from a stoichiometric molar mixture of SrCO3, Al2O3 and SrSO4. The process of the formation was followed using DTA, TGA, XRD and SEM analyses. In order to study the interaction of this compound with liquid aluminum alloys, the samples were immersed in liquid aluminum. During the synthesis, it was found the formation of two transitory phases, Sr3Al2O6 and SrAl2O4, between 900 and 1100°C. The strontium sulphoaluminate start to form around 900°C and it was completely formed at 1150°C. The Sr4Al6O12SO4 showed a slightly interaction with Al-Si alloy, with the formation of layer of alumina (less than 200μm), on the other hand, there was no interaction of this compound with Al-Mg alloy. The sulphoaluminate showed excellent corrosion resistance to aluminum alloys.

UR - http://www.scopus.com/inward/record.url?scp=84867908771&partnerID=8YFLogxK

M3 - Contribución a la conferencia

SN - 9781118273364

T3 - Ceramic Transactions

SP - 21

EP - 27

BT - Processing and Properties of Advanced Ceramics and Composites IV

PB - American Ceramic Society

T2 - Int. Symposia on Innovative Processing and Synthesis of Ceramics, Glasses and Composites, Advances in Ceramic Matrix Composites and Microwave Processing of Materials, Held During the Materials Sci. and Technol. 2011 Conf. and Exhibition, MS and T'11

Y2 - 16 October 2011 through 20 October 2011

ER -