Fast recovery power epitaxial diode

A. G. Rojas-Hernández*, A. Vera-Marquina, A. Garcia-Juárez

*Autor correspondiente de este trabajo

Producción científica: Capítulo del libro/informe/acta de congresoContribución a la conferenciarevisión exhaustiva

Resumen

Several diode designs to satisfy specific needs of quick response and power, this paper examines the arguments of a design that is economical in terms of manufacturing process but to improve the requirements of the few devices on the market with these characteristics (reverse breakdown voltage of 600V and reverse recovery time of 35ns). The design is tested using finite elements-through simulation and compared the results with commercial diodes by similar characteristics. The designed structure was p + nn +, with an epitaxial layer 50 mm thick and doped structure 2 x 1014 cm-3, which are obtained breakdown voltages of more than 600V and fast reverse recovery of less than 35 ns . A breakdown voltage of more than 600 V and reverse recovery times less than 35 ns were obtained for a p+nn+ structure, with an epilayer of 50 μm thickness and doping of 2 to 3 x 1014 cm-3.

Idioma originalInglés
Título de la publicación alojadaProceedings - 2012 9th Electronics, Robotics and Automotive Mechanics Conference, CERMA 2012
Páginas389-394
Número de páginas6
DOI
EstadoPublicada - 2012
Evento2012 9th Electronics, Robotics and Automotive Mechanics Conference, CERMA 2012 - Cuernavaca, Morelos, México
Duración: 19 nov. 201223 nov. 2012

Serie de la publicación

NombreProceedings - 2012 9th Electronics, Robotics and Automotive Mechanics Conference, CERMA 2012

Conferencia

Conferencia2012 9th Electronics, Robotics and Automotive Mechanics Conference, CERMA 2012
País/TerritorioMéxico
CiudadCuernavaca, Morelos
Período19/11/1223/11/12

Huella

Profundice en los temas de investigación de 'Fast recovery power epitaxial diode'. En conjunto forman una huella única.

Citar esto