Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride

Fernando Javier Carrasco-Guigón; Dora Evelia Rodríguez-Félix; María Mónica Castillo-Ortega; Hisila C. Santacruz-Ortega; Silvia E. Burruel-Ibarra; Jose Carmelo Encinas-Encinas; Maribel Plascencia-Jatomea; Pedro Jesus Herrera-Franco; Tomas Jesus Madera-Santana

doi:10.3390/ma10020105

Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride

Fernando Javier Carrasco-Guigón, Dora Evelia Rodríguez-Félix^*, María Mónica Castillo-Ortega, Hisila C. Santacruz-Ortega, Silvia E. Burruel-Ibarra, Jose Carmelo Encinas-Encinas, Maribel Plascencia-Jatomea, Pedro Jesus Herrera-Franco, Tomas Jesus Madera-Santana

^*Autor correspondiente de este trabajo

Producción científica: Contribución a una revista › Artículo › revisión exhaustiva

18 Citas (Scopus)

Resumen

The preparation of composites of synthetic and natural polymers represent an interesting option to combine properties; in this manner, polypropylene and chitosan extruded films using a different proportion of components and polypropylene-graft-maleic anhydride (PPgMA) as compatibilizer were prepared. The effect of the content of the biopolymer in the polypropylene (PP) matrix, the addition of compatibilizer, and the particle size on the properties of the composites was analyzed using characterization by fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), tensile strength, and contact angle, finding that in general, the addition of the compatibilizer and reducing the particle size of the chitosan, favored the physicochemical and morphological properties of the films.

Idioma original	Inglés
Número de artículo	105
Publicación	Materials
Volumen	10
N.º	2
DOI	https://doi.org/10.3390/ma10020105
Estado	Publicada - 2017

Nota bibliográfica

Publisher Copyright:
© 2017 by the authors.

Acceder al documento

10.3390/ma10020105

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Carrasco-Guigón, F. J., Rodríguez-Félix, D. E., Castillo-Ortega, M. M., Santacruz-Ortega, H. C., Burruel-Ibarra, S. E., Encinas-Encinas, J. C., Plascencia-Jatomea, M., Herrera-Franco, P. J., & Madera-Santana, T. J. (2017). Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride. Materials, 10(2), Artículo 105. https://doi.org/10.3390/ma10020105

@article{af7bda37c4034feab841a4de501ada9f,

title = "Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride",

abstract = "The preparation of composites of synthetic and natural polymers represent an interesting option to combine properties; in this manner, polypropylene and chitosan extruded films using a different proportion of components and polypropylene-graft-maleic anhydride (PPgMA) as compatibilizer were prepared. The effect of the content of the biopolymer in the polypropylene (PP) matrix, the addition of compatibilizer, and the particle size on the properties of the composites was analyzed using characterization by fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), tensile strength, and contact angle, finding that in general, the addition of the compatibilizer and reducing the particle size of the chitosan, favored the physicochemical and morphological properties of the films.",

keywords = "Chitosan, Composites, Extrusion, Maleic anhydride, Polypropylene",

author = "Carrasco-Guig{\'o}n, {Fernando Javier} and Rodr{\'i}guez-F{\'e}lix, {Dora Evelia} and Castillo-Ortega, {Mar{\'i}a M{\'o}nica} and Santacruz-Ortega, {Hisila C.} and Burruel-Ibarra, {Silvia E.} and Encinas-Encinas, {Jose Carmelo} and Maribel Plascencia-Jatomea and Herrera-Franco, {Pedro Jesus} and Madera-Santana, {Tomas Jesus}",

note = "Publisher Copyright: {\textcopyright} 2017 by the authors.",

year = "2017",

doi = "10.3390/ma10020105",

language = "Ingl{\'e}s",

volume = "10",

journal = "Materials",

issn = "1996-1944",

publisher = "MDPI AG",

number = "2",

}

Carrasco-Guigón, FJ, Rodríguez-Félix, DE, Castillo-Ortega, MM, Santacruz-Ortega, HC , Burruel-Ibarra, SE , Encinas-Encinas, JC , Plascencia-Jatomea, M, Herrera-Franco, PJ & Madera-Santana, TJ 2017, 'Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride', Materials, vol. 10, n.º 2, 105. https://doi.org/10.3390/ma10020105

Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride. / Carrasco-Guigón, Fernando Javier; Rodríguez-Félix, Dora Evelia; Castillo-Ortega, María Mónica et al.
En: Materials, Vol. 10, N.º 2, 105, 2017.

Producción científica: Contribución a una revista › Artículo › revisión exhaustiva

TY - JOUR

T1 - Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride

AU - Carrasco-Guigón, Fernando Javier

AU - Rodríguez-Félix, Dora Evelia

AU - Castillo-Ortega, María Mónica

AU - Santacruz-Ortega, Hisila C.

AU - Burruel-Ibarra, Silvia E.

AU - Encinas-Encinas, Jose Carmelo

AU - Plascencia-Jatomea, Maribel

AU - Herrera-Franco, Pedro Jesus

AU - Madera-Santana, Tomas Jesus

PY - 2017

Y1 - 2017

N2 - The preparation of composites of synthetic and natural polymers represent an interesting option to combine properties; in this manner, polypropylene and chitosan extruded films using a different proportion of components and polypropylene-graft-maleic anhydride (PPgMA) as compatibilizer were prepared. The effect of the content of the biopolymer in the polypropylene (PP) matrix, the addition of compatibilizer, and the particle size on the properties of the composites was analyzed using characterization by fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), tensile strength, and contact angle, finding that in general, the addition of the compatibilizer and reducing the particle size of the chitosan, favored the physicochemical and morphological properties of the films.

AB - The preparation of composites of synthetic and natural polymers represent an interesting option to combine properties; in this manner, polypropylene and chitosan extruded films using a different proportion of components and polypropylene-graft-maleic anhydride (PPgMA) as compatibilizer were prepared. The effect of the content of the biopolymer in the polypropylene (PP) matrix, the addition of compatibilizer, and the particle size on the properties of the composites was analyzed using characterization by fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), tensile strength, and contact angle, finding that in general, the addition of the compatibilizer and reducing the particle size of the chitosan, favored the physicochemical and morphological properties of the films.

KW - Chitosan

KW - Composites

KW - Extrusion

KW - Maleic anhydride

KW - Polypropylene

UR - http://www.scopus.com/inward/record.url?scp=85013806110&partnerID=8YFLogxK

U2 - 10.3390/ma10020105

DO - 10.3390/ma10020105

M3 - Artículo

SN - 1996-1944

VL - 10

JO - Materials

JF - Materials

IS - 2

M1 - 105

ER -

Preparation and characterization of extruded composites based on polypropylene and chitosan compatibilized with polypropylene-graft-maleic anhydride

Resumen

Nota bibliográfica

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto