Removal of copper cyanide complexes from solutions formed in silver/gold -cyanidation recovery process

José R. Parga, Jesús L. Valenzuela, Luciano E. Ramirez

Resultado de la investigación: Capítulo del libro/informe/acta de congresoCapítulorevisión exhaustiva


An innovative process for removing copper cyanide complexes including silver and zinc from cyanidation circuits has been developed. The technology was based on the inducing the nucleated precipitation of copper and silver in a tube serpentine reactor, using sodium sulfide as the precipitate and sulfuric acid as pH control. The results showed that pH had a great effect on copper cyanide removal efficiency and the optimum pH was about 3 to 3.5. At this pH value copper cyanide removal efficiency could be achieved above 97 and 99%, when influent copper concentration ions were 650 and 900 ppm respectively. In this process (sulphidizaton-acidification-recycle-thickening), the cyanide associated with the copper cyanide complexes is released as HCN gas under weakly acidic conditions, allowing it to be recycled back to the cyanidation process as free cyanide. This system was successfully commercial applied at Minera William in Mexico.
Idioma originalEspañol (México)
Título de la publicación alojadaTMS Annual Meeting
Número de páginas8
EstadoPublicada - 2012

Serie de la publicación

NombreTMS Annual Meeting

Palabras clave

  • Copper recovery
  • Cyanide recovery
  • Precipitation copper
  • Subsidization

Citar esto