Sweet Corrosion Inhibition by CO 2 Capture.

Jesus Porcayo-Calderon, Jorge Canto, L M Martinez-de-la-Escalera, Adrian Neri

Resultado de la investigación: Contribución a una revistaArtículorevisión exhaustiva

Resumen

The most practical and economical way to combat the problems derived from CO 2 corrosion (sweet corrosion) is the use of corrosion inhibitors of organic origin. Its main protection mechanism is based on its ability to adsorb on the metal surface, forming a barrier between the metal surface and the aggressive medium. However, despite its excellent performance, its inhibition efficiency can be compromised with the increase in temperature as well as the shear stresses. In this study, the use of an inorganic inhibitor is proposed that has not been considered as an inhibitor of sweet corrosion. The reported studies are based on using LaCl 3 as a corrosion inhibitor. Its behavior was evaluated on 1018 carbon steel using electrochemical measurements, such as potentiodynamic polarization curves, open-circuit potential measurements, linear polarization resistance measurements, and electrochemical impedance. The results showed an inhibition efficiency of the sweet corrosion process greater than 95%, and that the inhibition mechanism was different from the classic corrosion process in CO 2-free electrolytes. In this case, it was observed that the inhibitory capacity of the La 3+ cations is based on a CO 2-capture process and the precipitation of a barrier layer of lanthanum carbonate (La 2(CO 3) 3).

Idioma originalInglés
PublicaciónMolecules (Basel, Switzerland)
Volumen27
N.º16
DOI
EstadoPublicada - 16 ago 2022
Publicado de forma externa

Huella

Profundice en los temas de investigación de 'Sweet Corrosion Inhibition by CO 2 Capture.'. En conjunto forman una huella única.

Citar esto